PROSHEET 850

Looking for an economical, automated solution to converting roll materials into sheets?

The ProSheet 850 is a complete, stand alone system including auto-feed system capable of converting materials up to 8.5 inches in width at speeds up to 10 inches per second. Offering three different user modes, sheets can be cut to a specified linear length, cut using a printed registration mark, or double cut removing a gutter between the finished sheets.

Processor Rabbit semiconductor 2100
Blades Helical cutting blade
Modes Single cut to mark, double cut to mark and linear
Optical Sensor Sunx FX301 media sensor
Mechanical Accuracy 0.004 inch (0.1 mm)
Accuracy 0.02 inch (0.508 mm)
Acceleration 1 G (32.2 ft/sec/sec or 9.8 m/sec/sec)
Feed Rate Up to 10 inches/second (0.2 to 25.4 cm/second)
Cutting Cycle Time 550 ms 0.55 second
Media Width 4 - 8.5 inches (10.2 - 222 cm)
Power Requirements 100 - 120, 200 -240 VAC
Power Consumption 320 watts
Operating Temperature 0 to 40 degree C operating
-40 to -75 degree C non operating
Operating Humidity 5% to 95% relative humidity non-condensing
Note Requirements for media stability should be considered
Dimensions L33xH14xW16
Weight 68 lbs
Program Qty 1 to 9999
Min Length .5 inch
Warranty 1 year